玫德集团

AWWA GROOVED Y-TYPE STRAINER FOR WATERWORKS#V8
AWWA GROOVED Y-TYPE STRAINER FOR WATERWORKS#V8

Dimensions:
2” (DN50)-12” (DN300)

Design Standard:
ASME B16.42

Connection Standard:
AWWA C606

Working Pressure:

300PSI

Application:
The AWWA standard grooved strainer is mainly applied in the waterworks system, working temperature is from 0℃ to 80℃

 

UL
NSF/ANSI 61
NSF/ANSI 372
Contact Feedback
Product*
Telephone number*
Address*
E-mail*
Requirement specification or comments*
DESCRIPTION
OVERVIEW
TECHNICAL
PARAMETERS
PRODUCTS
RECOMMENDED
DESCRIPTION OVERVIEW

The strainer mainly removes impurities in the medium through the filter to prevent particulate impurities from entering the passage and causing wall plugs to protect the fittings on the equipment pipeline from wear and blockage.

TECHNICAL PARAMETERS
All information
Technical Information
Please login
PRODUCTS RECOMMENDED
ANSI FLANGED Y-TYPE STRAINER, FIG# V4
ANSI FLANGED Y-TYPE STRAINER, FIG# V4
ANSI FLANGED Y-TYPE STRAINER, FIG# V4
ANSI FLANGED Y-TYPE STRAINER, FIG# V4
ANSI GROOVED Y-TYPE STRAINER, FIG# V8
ANSI GROOVED Y-TYPE STRAINER, FIG# V8
BS FLANGED Y-TYPE STRAINER#V4
BS FLANGED Y-TYPE STRAINER#V4
BS FLANGED Y-TYPE STRAINER#V4
BS FLANGED Y-TYPE STRAINER#V4
BS GROOVED Y-TYPE STRAINER, FIG# V8S
BS GROOVED Y-TYPE STRAINER, FIG# V8S
Brass Y-Type Strainer V1-601A
Brass Y-Type Strainer V1-601A
In order to give you a better service, our website uses cookies. By continuing to browse the website you are agreeing to our use of cookies & Disclaimer.
Accept